Our CNC Punching machines also cut angle and flats to length.  No sawing needed!

Our CNC punching capability produces very precise slots and round, square and hex holes in angles, channels and flats. Clip angles, truss members, racking sections and dozens of other products are completely processed on our machines with no additional operations needed. These machines feature 2 punch stations so each angle leg is punched simultaneously. They also feature full character marking capability on one leg.

If you need reliable, repeatable cost-effective punching of your structural material, contact us today.

Profile ShapeSize
AngleMinimum: 1-1/2" X 1-1/2" X 3/16"
Maximum: 6" X 6" X 3/4"
FlatMinimum: 3/16" X 2" | Maximum: 3/4" X 6"
ChannelMinimum: 3" | Maximum: 6"
Max. Bar Length40'
Punch Stations2 for each angle leg
Profile ShapeSize
AngleMinimum: 1-1/2" X 1-1/2" X 3/16"
Maximum: 6" X 6" X 3/4"
FlatMinimum: 3/16" X 2" | Maximum: 3/4" X 6"
ChannelMinimum: 3" | Maximum: 6"
Max. Bar Length40'
Punch Stations2 for each angle leg